cBots

Warning! Executing cBots downloaded from this section may result in loss of funds. Use them at your own risk.
Notification Publishing copyrighted material is strictly prohibited. If you believe there is copyrighted material in this section you may use the Copyright Infringement Notification form to submit a claim.
How to install
EMA┬┤s cross Bot
  1
  0
  1050
free  28 Oct 2020
A coding modification is required, i hope someone could assist in doing tow things:  changing the simple SL to trailing SL. adding trading hours parameter ( trading can be like between two fixed hours ) I am using a cross of two EMA ( fast and medium)  with a condition of being above or below the major EMA ( like 200 or so - here it is named as slow) this bot gave me great result while back testing it, looking into it.  an example of a good back test results is:  GBPUSD:  timeframe: 15 minutes  Slow period: 190 Medium:50 fast:14 SL:70 TP: 105   Note: This is a modified version by me on the bot done by https://ctrader.com/forum/cbot-support/10910 all credit goes to the original bot.    following is the code ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  using System; using System.Linq; using cAlgo.API; using cAlgo.API.Indicators; using cAlgo.API.Internals; using cAlgo.Indicators; namespace cAlgo {     [Robot(TimeZone = TimeZones.UTC, AccessRights = AccessRights.None)]     public class EMACross_RSI : Robot     {         [Parameter("Source")]         public DataSeries SourceSeries { get; set; }         [Parameter("Label", DefaultValue = "EMA")]         public string label { get; set; }         [Parameter("Slow Periods", DefaultValue = 30)]         public int SlowPeriods { get; set; }         [Parameter("Medium Periods", DefaultValue = 12)]         public int MediumPeriods { get; set; }         [Parameter("Fast Periods", DefaultValue = 5)]         public int FastPeriods { get; set; }         [Parameter("Stop Loss", DefaultValue = 10)]         public int SL { get; set; }         [Parameter("Take Profit", DefaultValue = 10)]         public double TP { get; set; }         [Parameter("Quantity (Lots)", DefaultValue = 1, MinValue = 0.01, Step = 0.01)]         public double Quantity { get; set; }         private ExponentialMovingAverage slowMa;         private ExponentialMovingAverage mediumMa;         private ExponentialMovingAverage fastMa;         protected override void OnStart()         {             fastMa = Indicators.ExponentialMovingAverage(SourceSeries, FastPeriods);             mediumMa = Indicators.ExponentialMovingAverage(SourceSeries, MediumPeriods);             slowMa = Indicators.ExponentialMovingAverage(SourceSeries, SlowPeriods);         }         protected override void OnBar()         {             int index = MarketSeries.OpenTime.Count - 2;             var longPosition = Positions.Find(label, SymbolName, TradeType.Buy);             var shortPosition = Positions.Find(label, SymbolName, TradeType.Sell);             if ((fastMa.Result[index] > slowMa.Result[index]) && (mediumMa.Result[index] > slowMa.Result[index]) && (fastMa.Result[index - 1] < mediumMa.Result[index - 1]) && longPosition == null)             {                 if (longPosition != null)                     ClosePosition(longPosition);                 ExecuteMarketOrder(TradeType.Sell, Symbol, VolumeInUnits, label, SL, TP);             }             else if ((fastMa.Result[index] < slowMa.Result[index]) && (mediumMa.Result[index] < slowMa.Result[index]) && (fastMa.Result[index - 1] > mediumMa.Result[index - 1]) && shortPosition == null)             {                 if (shortPosition != null)                     ClosePosition(shortPosition);                 ExecuteMarketOrder(TradeType.Buy, Symbol, VolumeInUnits, label, SL, TP);             }         }         private long VolumeInUnits         {             get { return Symbol.QuantityToVolume(Quantity); }         }     } }
paid  25 Oct 2020
New release "Breakout_Reverse 5 Strategies_10.20"  Considering the upcoming events, US Presidential Elections, Covid-19 issues, US-China disputes and other global macroeconomic factors, markets can undergo strong fluctuations creating considerable volatility.  In the new release we have included a Consecutive Losses Protection for Long & / or Short positions, as a prevention in case of high volatility.  This protection is particularly suitable for Reverse / Mean Reversion strategies where a high volatility can upset the Mean Reversion propensity typical of the Forex currency markets.  It can also be applied to Breakout & Trend Following strategies to reduce DrawDown (where applicable).  --------------------------------------------------------------------------------------- Multi TimeFrame program uses 5 different strategies based on supports and resistances by calculating the maximum and minimum prices on a certain number of bars on 5 different Timeframes.  The 5 strategies work independently and in each strategy the Buy & Sell parameters are different and work autonomously.  In the event that all the strategies are open with the Buy & Sell operating, there may be a maximum of 10 open positions.  However, the case in which all strategies are used with activated Buy & Sell is rare.  STRATEGIES DO NOT USE ANY GRID SYSTEM OR MARTINGALA  In the markets of the major currencies crosses, Metals, oil and Indices some of them adapt better on Breakout strategies and others on Reverse strategies and you can understand it by doing optimization.  For example, the major currencies cross adapt better on Reverse and mean reverting strategies. American indices such as S&P500 and also the DAX in Europe fit better on Breakout strategies.  Each strategy must be optimized independently of the others. Buy & Sell as well in each strategy must be optimized separately.  However in each strategy there are at most 3 main parameters to be optimized.  DEMO VERSION AVAILABLE  Strategies:   Breakout   Reverse   Reverse On Livel   Trend Breakout   Trend Reverse  Exit Strategies: (All positions are protected with StopLoss)  - Strategy logic exit  - Trail & Strategy  - StopLoss & Breakeven / TakeProfit  - Trend Follow (TakeProfit is floating and is used only as security in case where the bot is no longer controllable due to connection failure or other causes. The position is closed only by the StopLoss which Trails)  - Solo StopLoss & Take Profit  - Solo Trailing (TakeProfit is floating and is used only as security in case where the bot is no longer controllable due to connection failure or other causes. The position is closed only by the StopLoss which Trails)     In each strategy:  - 5 different Timeframes  - Different Parametrs for Long & Short, they work autonomously.  - StopLoss & TakeProfit are automatically assigned (Depending on volatility and volume traded in the book)  - Trailing Stop is automatically assigned.  - 1 single entry strategy  - 6 different exit strategies. Optimization will indicate the best exit strategy.  - Option to Cut DrawDown (when it's appropriate to use)  - Money Management (Position Sizing) on winning and loosing trade.  - Consecutive Losses Protection for BUY / SELL (Separately)    Optimization:  The optimization process, must be done for each strategy excluding the others and separately on a single strategy first Buy and then Sell), on a normal computer, it can take longer (consider that you are working on 5 TimeFrame) but in the end it is worth as you will get very satisfying results and succeeding also to understand where the symbol moves better on Buy (long) or Sell (short) in Breakout or in Reverse. When the optimization of a strategy ends, set aside the best parameters. When has been done for all strategies, manually enter the parameters of each strategy in the bot.   The Trading System has been designed to work at the best on all types of Forex cross currencies, Metals, Oil, Indices, futures and Crypto Currencies.  Pay attention to the Trade volume for each instrument as it changes from Forex to Indices, Metals, Oil, Futures and Crypto Currencies. Some Brokers for CFD give you the opportunity to trade all of them with micro lots. Others use different Lotsize (example for Indices minimum 1 contract, Gold 0.1 / 1 Oz).   In the Trading System, if you enter a wrong value, the Bot will automatically use the minimum tradable volume.  Warning: when trading CFDs (Indices, Futures, Crypto Currencies, Metals) the results can vary widely between one broker and another. The suggestion is to operate on CFDs using the same broker in which the optimization was made.     Backtest and optimization must be done considering the following parameters at best  (lined up in sequence of importance and priority):  - SharpRatio: (which is a reward to risk ratio) minimum value 0.13  - Max Balance Drawdown & Max Equity Drawdown: Max 15% better under 10%. Discard higher values. Rather than earning, you should consider what you can lose. If you don't pay attention to Drawdown, working with a high leverage is very easy to lose the whole capital. With high leverage you can earn a lot compared to the capital but you can also easily drain the whole account. Using Position Sizing (on gain) you can double or triple the earnings and in this case the Drawdown can go up to max 23%. Do it only if it is worth on increasing the gain. To reduce the Drawdown use Position Sizing (on lose) the gain in this case will be slightly reduced.  - Profit Factor: minimum value 1.40 - better if it is higher than 1.50  - Net Profit  - Trades number: all optimizations must be done over a minimum of 8/9 years period to have reliable results. In this period consider at minimum to have more than 500 trades. Total trades must be obtained by adding the trades of all the strategies used. Strategies can obtain a minimum of 50 + trades in one way (Buy or Sell)  - Average Trade: The average earnings for each individual trade. Considering an initial capital of $ 10,000, 200 leverage, ordersize (bet) 0.10 lots (10,000 volume). The Average Trade must be more then 20.00 $ per Trade  P.S .: When you optimize or backtest put Commission to 50 (x million) and Spread to 2 for major Forex crosses and more for minor crosses. This is used to amortize slippage.  - The parameters attached to the bot have been optimized using Pepperstone Broker from 08/02/2011 to 15/03/2020 (with some parameters the Drawdown comes out  higher then 15% because it was worth pushing on the Money Management).  To avoid "Over-Fitting":  - Optimizations and Backtests must be performed for at least 8/9 or more years for reliable results. The optimization done on short periods is not absolutely reliable. Professional traders optimize and backtest their automatic systems using very long periods (10/15/20 years) of data feeds with paid Data Feeds providers. All Brokers who use cTrader platform for Forex give a free set of Data Feeds of about 8/9 years and for CFDs 5/6 years.  - To test if the parameters obtained are robust, do backtests by varying them slightly (do not change "Livel TF" which is the Timeframe).  If you get positive results, even if qualitatively lower than the optimized ones, this means that the parameter set is robust and not "Overfitted".  ----------------------------------------------------------------------     DEMO VERSION: Click Here  Active.cTrader.Bot HomePage   Contacts and information: active.ctrader.bot@gmail.com  //==================================================== 
reposter
  2
  5
  490
free  15 Oct 2020
Repost info about trade to telegram channel
free  10 Oct 2020
Saw @linton.nkambule just wanted something nice and simple. This cBot: - Trades either against, or with, the previous candle. - Has a set SL and TP equidistant from the entry price based upon a percentage of the previous bar's range. If people want any more requests built, fire us an email at development@fxtradersystems.com, or get in contact at: fxtradersystems.com/support/
free  29 May 2021
GBPUSD H1 +141% From Oct 2018 - Oct 2020 Jan 1st - Now forward tested +36% with 35 trades   Since launch, AUDUSD and EURUSD have both been added to increase profitability That's just the beginning… This trading system uses the RSI extremes in conjunction with multiple moving averages for accurate entry signals. Paired with risk management, this robot is simple but effective.      RSI w/ Moving Average Crossover   Features Enhanced implementation of the RSI and Moving Averages Advanced entry and exit confirmations Exiting trend trades when they are about to reverse Dynamic trading volume based on % of equity/balance High-performance/accuracy backtesting and optimization Telegram Message implementation - Get notified when the robot enters/exits a position Turn off 'Execute Trades' and use the robot with Telegram as a signal provider.      
paid  25 Feb 2021
This is a cBot which will automatically adjust your stop loss to trail behind the price using the standard cTrader Moving Average indicator, this will also lock in any profits as the moving average line moves past the entry price and at the same time if the price retraces it limits the losses. Download The MA Trailing Stop System Watch a Video Tutorial Ask a Question?   Contact: instant chat group Website: https://clickalgo.com Twitter | Facebook | YouTube | Pinterest | LinkedIn
Zone Hedging v1
  1
  0
  862
free  29 Sep 2020
This bot places orders between the zone. Every position compensates for losing trade with a higher volume.  Here is a sample hedging. Avoid to trade while ranging market.   
free  09 Nov 2020
Get cBot Sets here: http://public.algoredefine.com.au/ Licensing is only required for live trading. For purposes such as backtesting and optimization this software stays free and fully featured, without restrictions. This trading system is a highly efficient robot based on the Waddah Attar Explosion indicator for accurate entry signals, working in conjunction with a variety of trend indicators, advanced risk management systems, and an optional NEWS Manager. Features Enhanced implementation of 3 famous, powerful indicators – Waddah Attar Explosion, SuperTrend and HullMovingAverage trading algorithms Advanced entry confirmations Advanced exit triggers including exiting trades on trend reversal detections Dynamic trading volume based on % of equity/balance Customizable Trailing StopLoss (with Break-Even) 5-level Advanced Take Profit High-performance/accuracy backtesting and optimization On-chart indicator drawing NEWS Manager with full support for backtesting and optimization [BETA] Telegram and Email with customizable templates Please join us at our Telegram Group for any question/query, and meet a bunch of friendly traders. ALGO reDefine        
paid  25 Feb 2021
The Waddah Attar trading system is a community-driven project which is based on the Waddah Attar Explosion indicator for accurate entry signals, it uses a variety of trend indicators and advanced risk management. So far the community feedback has been positive and the results look promising. Download the Waddah Attar Explosion Trading System Read the user Guide Watch a Video Demonstration Ask a Question?   Contact: instant chat group Website: https://clickalgo.com Twitter | Facebook | YouTube | Pinterest | LinkedIn
Bitcoin Hype for Free
  0
  0
  979
free  17 Sep 2020
This bot trades fully automatically against the markets of your choice by performing the EMA 3 Crossing strategy. This bot is based on the EMA 3 Crossing indicator that I released on the cTrader platform a couple of days ago. See this for the indicator. The bot will detect all tradeable setups and automatically sets the correct stoploss and takeprofit. It is also equiped with some additional risk management features. After you have activated this bot on the markets of you choice, you can site back and watch as the bot trades this profitable strategy. In our backtest measure the bot performed over 270% in a 18 month timeslot period [from Jan19 to Sep20]. Feel free to download, configure and test the bot with other timeslots helpful to your chose. In the next video I'll show you how you can activate this bot in your own cTrader software in just a few minutes. It's really that easy. I'll also show you how to configure the bot for your favorite markets and timeframes. This bot can be activated on all markets that are available in the cTrader platform, as long as the market is open. Check this instruction video and I'll explain how you can install and configure this bot yourself on every market of your choosing. Download https://gum.co/UlKCe  
EA ADX Candle 1.0
  2
  0
  918
free  17 Sep 2020
Ctrader - Trading system based on ADX and price action which consider supports and resistances by calculating the maximum and minimum prices. Close order un next candle.   Download https://gum.co/iAaza
Ultron for GBPUSD H1
  0
  0
  1026
free  16 Sep 2020
I have written an implementation of the Ultron robot for the cTrader platform. THIS ROBOT WORKS ONLY FOR GBPUSD H1. The Ultron robot is an idea developed by Pawel Gawron. This strategy is explained in this thread of the forum of ForexFactory: https://www.forexfactory.com/thread/840339-my-ultron-ea-for-gbpusd-h1-timeframe To understand the strategy read the whole thread, the posts by Pawel Gawron with more attention, and this post in particular: https://www.forexfactory.com/thread/post/11677971#post11677971 Before you ask questions about the robot, make sure that you have read and understood the whole thread in the forum and the manual of the robot too. The robot uses GMT times, and automatically takes into account the shift of one hour in the summer months (daylight saving time). That is, the allowed trading hours are shifted one hour earlier in summer. The robot is profitable in my backtest between January 2014 and September 2020. The backtest has been done with high quality tick data, starting capital 10000 EUR and fixed lot size 0.01. This robot, with source code and input parameter files and manual, can be downloaded from this link: https://drive.google.com/drive/folders/1_sEDeLZQm5CZTzKCJIFOt_5qWgam41C3?usp=sharing If you know how to program and you manage to make the robot and this strategy to be profitable in other symbols, please let us know in the comments.