Indicators

Notification Publishing copyrighted material is strictly prohibited. If you believe there is copyrighted material in this section you may use the Copyright Infringement Notification form to submit a claim.
How to install
.AN. Currency Indexes
  0
  0
  124
paid  01 Jan 2020
You know "Dollar index - it measures the value of the U.S. dollar relative to a basket of top 6 currencies". It is used to understand the dollar is strenghtening or weakening. I think it is wise to measure streangth (index) of Every currency you trade, to avoid uncertain situations during a day. Looking at screenshot - let's analize popular pairs EUR/USD, USD/CHF and USD/JPY. We can see both JPY and USD are in sideways at similar levels - non of these currencies has no rise nor fall sentiment, so this pair gives us no opportunitites today. EUR and CHF are cheaping that day - so we can sell EUR or CHF and buy USD. But we also see how AUD is getting stronger - so it is even more reasonable to sell EUR not against USD but against AUD. And so on ... I think the main idea is to go out from comfort zone, and to give attention not only to currency you like to trade, but to See a bigger picture of a currency market at all, to be not a romantic person based on sympathies to these or that instrument, but to be a Trader - the person who knows when and where to be present to pick up profit. Source code is not public. You can download the indicator only from the author’s website www.fxcoder.store  There is no other way to save copyrights. P.S.  my name is Alex, I'm not a big trader or programmer, but only a very diligent person and try to do good worthwhile things to at least slightly improve my very modest life. Need some support - so I post my work at least for a nominal price, please be understanding.  
paid  03 Dec 2019
DCT calculates all necessary - Direction, possible Correction Levels and Targets. This is a result of years of trading and observing market behavior, how other indicators work - understanding misses - and attempts to improve algorithms. Indicator was created as the basis for the logic for the robot - but something came out that is difficult to describe in words. Take a closer look. This indicator has become the main tool for me and those who tried it. Source code is not public. You can download the indicator only from the author’s website www.fxcoder.store  There is no other way to save copyrights. P.S.  my name is Alex, I'm not a big trader or programmer, but only a very diligent person and try to do good worthwhile things to at least slightly improve my very modest life. Need some support - so I post my work at least for a nominal price, please be understanding. *** I will not write buy/sell instructions - I'll write about buy... sell will be the same... but vice versa. I hope this is understandable and does not require additional explanation. by DCT - you should prefer buy Above daily level. Better when it is Green but not Violet - Green means daily candle acceleration. This level will also remains Green While there will be some weak opposite daily candles Not going beyond the ascending daily channel. This level is enough to successfully take large several-day movements but I prefer intraday trading - therefore, the indicator has not one but three levels. Four-hour and one-hour ones have the same logic of analysis of candle power and channel direction - plus, for clarity, they are shaded to create a zone. This zone - this is the place for entries. You should wait while price dives into green colored zone, maybe it will even goes through it and change color to red  - but so far it is Above the daily level - we cannot know whether this is a correction - or this is a trend reverse. So you should be OUT of the market. waiting. and buy only when we have the green color zone above green daily level again - this zone will be new level of support for further upward movement. Also - it is important not to be greedy and not wait for huge gifts from the market, but to TAKE profit upon reaching every of the volatility levels, or leave part of position in the breakeven in case of movement continuation. Market is simple - it makes big moves based on economics e t c in rare cases, but intraday moves - based on bubble of huge cash thrown into it - this bubble flies up - you should catch it while it is flying, realizing - is just a bubble it quickly loses strength and is torn apart by robots and traders. That is why it is Very important to Have Adequate TARGETS and Take it - or cash (including yours) will be taken by someone else. DCT draws support levels and direction in colors well enough. Targets is more complicated but some calculations included. There is no volatility target levels when violet flat, and three levels when there is green trend acceleration. Short quick Target lines - calculated from H4 volatility, long Target lines - based on daily volatility.  
paid  02 Dec 2019
Tiny tool to see the level of zero of all positions and profit / loss of the position (or positions, even if they are multidirectional) for every 10 points (or another value) in the account currency directly on the chart. + account information: - pip value - current symbol positions P/L - total P/L of all positions as a percentage to control current profit or drawdown - used and free margin - ballance and equity Parameters : - step distance in pips - show/hide account info in right bottom corner Source code is not public. You can download the indicator only from the author’s website https://www.fxcoder.store . There is no other way to save copyrights.   P.S.  my name is Alex, I'm not a big trader or programmer, but only a very diligent person and try to do good worthwhile things to at least slightly improve my very modest life. Need some support - so I post my work at least for a nominal price, please be understanding.
paid  01 Jan 2020
It is difficult to imagine trading without an oscillator. Here is my version of the well-known Stochastic RSI. Indicator has option to display D, H4, H1 waves resonance or H4, H1, M15 for quick scalping trading. No movement can be direct and eternal - there have always been and will be Waves ... /\/ It is important to see in what phase the daily wave is. It would be foolish to trade a one-hour wave against the direction of a H4 or older Daily wave, and on the contrary - it is very reasonable to trade when the waves add up in resonance ... / / / ... resonance moments are highlighted on the indicator by dots ... these are close to ideal moments for entry . Source code is not public. You can download the indicator only from the author’s website www.fxcoder.store P.S.  my name is Alex, I'm not a big trader or programmer, but only a very diligent person and try to do good worthwhile things to at least slightly improve my very modest life. Need some support - so I post my work at least for a nominal price, please be understanding.    
free  05 Jul 2017
Hi, This Indicator basically displays : 1. Displays the PIPS (hourly, daily, weekly, monthly) and 2. Draw Lines through +/- ATR values on the CHART.   Have divided the ATR Value by x (x=1,2,3,4).   And converted it to Pips.  Added these Pips value to "OPEN PRICES" and drawn the lines on Chart. How to USE IT : 1.  Good for Trade :  If the Price has crossed  +D-1/2 ATR  or  -D-1/2 ATR, then it means that this PAIR is good for trading (either Buy or Sell. depending on your other triggers). 2.  Trigger :  After it has crossed Daily ATR lines, then wait for the prices to cross the "Hourly +ve or -ve" ATR line to start trading.  (Direction based on other trigger indicators).   3. Trending :  If Both Weekly ATR lines (+ve or -ve) are above Both the Monthly ATR Lines or vice versa. The Pair is trending. 4. Ranging :   if Daily lines are within Weekly ATR Lines,  and Weekly ATR Line are between the Monthly ATR lines. The Pair is ranging. 5. Short-Term Reversal :  if Price have broken all +ve (-ve)  Daily, Weekly, Monthly ATR lines in single session. *if it was early in ranging setup. 6. OPEN PRICES  :  if Daily Open Price is above Weekly Open Price, and Weekly Open Price is above Monthly Open Price  or vice versa ), then usually this Pair is also in trending mode but ranging setup (#4) will confirm or reject it. Disclaimer : This is not a Holy grail. Please use this for short-term inter-day trading.  And keep Take Profit as per 15-min ATR value in Pips. And keep Stop Loss outside 1-Hr ATR Line.  Leave your comments and feedback, so a cBOT can also be developed. Hope it helps other too who want to know how many Pips a Pair has moved from its opening price.   Please rate it and leave a comment. Thank you. ///S.Khan (*Still Learning to TRADE )  
free  05 Jul 2017
Hi, this indicator displays the Hourly, Daily, Weeky, Monthly Total Pips and ATR Value on Chart. Please rate it and leave a comment. Thank you. ///S.Khan    
free  05 Jul 2017
Hi, This indicator displays the Position info on the Chart over the Position Line.  Kind of visual.  (Courtesy : Charles Layton) Thank you. ///S.Khan    
free  05 Jul 2017
Hi, a simple indicator that displays Pair Info on top of the Chart.  Kinda Helpful information for Traders. Information Displayed are : 1. Pips Current and Closed  2. Unrealized and Closed Net P/L 3. Pip Cost  4. Net Vol and Total Count 5. Buy and Sell Volume 6. Buy and Sell Count 7. Profit Factor   Thank you S.Khan  
by ZO
paid  02 Dec 2019
Volume Profile for cTrader platform: (V2.0) Daily session Single session  Multiple numbers of sessions Multiple time frames (short-long) Buying and Selling volume Point of Control (POC) Profile high and Low. Daily levels ATR value How to http://www.zo-apps.com/volume/volume_profile-cealgo.mp4 This is a 7-day trial version >>here<< Lifetime license can be purchased >> here << or visit us at www.cealgo.com  
by Vince
free  27 Aug 2018
V.2 - added discription on how to modify the behavior of the indicator - added the possibilty to alert you on screen, with sound and by email (with special thanks to afhacker) (added parts are in Bolt) This is a modification on the Supertrend indicator of spka111. This indicator projects 2 Supertrend indicators on 1 chart with customisable parameters. It will also display the high or low of the last changes above/below the candle that caused the change. You can change the behavior of the Supertrend indicator by modyfing "_averageTrueRangelong" and "_averageTrueRangeshort" in the "Initialize()" part. Delete the ".WilderSmoothing". Insert a "." after "MovingAverageType". It will show you all the options you can change it to. This will affect the behavior of the indicator slightly and you can use it to fit your tradingstyle. To let the indicator part send you emails, alert you on screen or play a soundalert I used a method developed by afhacker. He created an alert popup window. You can find his project here: https://ctrader.com/algos/cbots/show/1692. Here you will find all the info you need to make this work. I will show you the Alert-lines I added to this algorithm to make it so it will create alerts on this indicator. The line you are looking for begins with "Alert.Factory.Trigger". The text between brackets e.g. "Buy Long"  you can change to what you like that the alert will display. As afhacker describes is that the time it will show in the popup window and emails are in UTC. You can this in the popup alert settings to your liking. Thank you afhacker for creating this great project! // Test Notifications on chart { var value = MarketSeries.Close[index - 1]; if (Functions.HasCrossedAbove(_upBufferlong, value, 1)) { var name = "BuyLong"; var high = MarketSeries.High[index - 1]; var text = high.ToString(); var xPos = index - 1; var yPos = high; var vAlign = VerticalAlignment.Top; var hAlign = HorizontalAlignment.Center; ChartObjects.DrawText(name, text, xPos, yPos, vAlign, hAlign, Colors.Lime); Alert.Factory.Trigger(TradeType.Buy, Symbol, MarketSeries.TimeFrame, Server.Time.AddHours(1), "Buy Long"); } } { var value = MarketSeries.Close[index - 1]; if (Functions.HasCrossedBelow(_downBufferlong, value, 1)) { var name = "SellLong"; var low = MarketSeries.Low[index - 1]; var text = low.ToString(); var xPos = index - 1; var yPos = low; var vAlign = VerticalAlignment.Bottom; var hAlign = HorizontalAlignment.Center; ChartObjects.DrawText(name, text, xPos, yPos, vAlign, hAlign, Colors.PeachPuff); Alert.Factory.Trigger(TradeType.Sell, Symbol, MarketSeries.TimeFrame, Server.Time.AddHours(1), "Sell Long"); } } // Test Notifications on chart { var value = MarketSeries.Close[index - 1]; if (Functions.HasCrossedAbove(_upBuffershort, value, 1)) { var name = "BuyShort"; var high = MarketSeries.High[index - 1]; var text = high.ToString(); var xPos = index - 1; var yPos = high; var vAlign = VerticalAlignment.Top; var hAlign = HorizontalAlignment.Center; ChartObjects.DrawText(name, text, xPos, yPos, vAlign, hAlign, Colors.Green); Alert.Factory.Trigger(TradeType.Buy, Symbol, MarketSeries.TimeFrame, Server.Time.AddHours(1), "Buy Short"); } } { var value = MarketSeries.Close[index - 1]; if (Functions.HasCrossedBelow(_downBuffershort, value, 1)) { var name = "SellShort"; var low = MarketSeries.Low[index - 1]; var text = low.ToString(); var xPos = index - 1; var yPos = low; var vAlign = VerticalAlignment.Bottom; var hAlign = HorizontalAlignment.Center; ChartObjects.DrawText(name, text, xPos, yPos, vAlign, hAlign, Colors.Red); Alert.Factory.Trigger(TradeType.Sell, Symbol, MarketSeries.TimeFrame, Server.Time.AddHours(1), "Sell Short"); } } I will upload the new indicator with email notifications when I get this working.
free  26 Sep 2013
This Indicator produces 2 x Moving Averages together on the chart, of which you can edit the settings as follows. ie SET Applied price to Close or Median using Zero, 1 , 2, 3 or 4 Price    = 0 - Close   Price    = 1 - Open   Price    = 2 - High   Price    = 3 - Low   Price    = 4 - Median Price   = (High+Low)/2  
by ZO
paid  02 Dec 2019
Volume Profile for cTrader platform: (V1.0) Fixed volume  Selected area volume Multiple time frames (short-long) Buying and Selling volume Point of Control (POC) Profile high and Low. Daily levels ATR value   This is a 7-day trial version >> here <<  Lifetime license can be purchased >> here << or visit us at www.cealgo.com