Name: IM AngleIndicator
Uploaded: 2026-07-04T12:48:53Z
Duration: 37 s
Description: ATR-normalized MA slope in degrees, comparable across all instruments. Color-coded labels flag strong trend moves.

IM_AngleIndicator turns the slope of a simple moving average into an objective, comparable angular measure.Most "angle" indicators calculate slope from the raw price change, but the result depends on the instrument's absolute scale and on the timeframe — so the same degree value means completely different things on a currency cross, an index, or a cryptocurrency. IM_AngleIndicator solves this by normalizing the SMA change by the ATR: the slope is expressed in "ATR per bar" and then converted into degrees. This way, a slope of 45° always represents a movement of 1 ATR per bar, regardless of the instrument or timeframe being analyzed. The result is a consistent reading and thresholds that can be reused across the entire portfolio.How it works<ul class="editor-list-ul"><li value="1" class="editor-list-item">Calculates the SMA on closing prices according to the chosen period.</li><li value="2" class="editor-list-item">Measures its change between two consecutive bars and normalizes it by dividing by the ATR.</li><li value="3" class="editor-list-item">Converts the resulting ratio into degrees via arctangent, returning a value roughly between −90° and +90°.</li><li value="4" class="editor-list-item">Plots the value as an oscillator in a dedicated panel and, when the slope exceeds the set threshold, adds a label on the price chart positioned above the high (bullish trend) or below the low (bearish trend).</li></ul>Key features<ul class="editor-list-ul"><li value="1" class="editor-list-item">Slope measurement independent of instrument and timeframe thanks to ATR normalization.</li><li value="2" class="editor-list-item">Configurable threshold in degrees to filter significant moves and exclude noise.</li><li value="3" class="editor-list-item">Directional color-coded labels (green for rising, red for falling) with an ATR-based vertical offset for clean placement relative to the candles.</li><li value="4" class="editor-list-item">Optimized chart-object handling: labels are limited to the most recent bars to preserve performance even on charts with long histories.</li><li value="5" class="editor-list-item">Fully customizable parameters: SMA period, ATR period, slope threshold, label visibility, and maximum number of labels.</li></ul>Use cases<ul class="editor-list-ul"><li value="1" class="editor-list-item">Identifying strong-trend phases versus sideways ranges.</li><li value="2" class="editor-list-item">Directional confirmation to support entry and exit strategies.</li><li value="3" class="editor-list-item">Comparing trend strength across multiple instruments using the same threshold.</li><li value="4" class="editor-list-item">A foundation for developing cBots that use the normalized slope as a trading signal.</li></ul>

<html>
 <head></head>
 <body>
 IM_AngleIndicator biến độ dốc của trung bình động đơn giản thành một thước đo góc khách quan và có thể so sánh được.
 Hầu hết các chỉ báo "góc" tính độ dốc từ sự thay đổi giá thô, nhưng kết quả phụ thuộc vào thang đo tuyệt đối của công cụ và khung thời gian — vì vậy cùng một giá trị độ góc có nghĩa hoàn toàn khác nhau trên một cặp tiền tệ, một chỉ số hoặc một đồng tiền điện tử. IM_AngleIndicator giải quyết điều này bằng cách chuẩn hóa sự thay đổi SMA theo ATR: độ dốc được biểu diễn bằng "ATR trên mỗi thanh" và sau đó được chuyển đổi thành độ. Bằng cách này, độ dốc 45° luôn đại diện cho sự di chuyển 1 ATR trên mỗi thanh, bất kể công cụ hay khung thời gian đang được phân tích. Kết quả là một phép đo nhất quán và các ngưỡng có thể tái sử dụng trên toàn bộ danh mục đầu tư.
 Cách hoạt động
 <ul class="editor-list-ul">
 <li value="1" class="editor-list-item">Tính SMA trên giá đóng cửa theo khoảng thời gian đã chọn.</li>
 <li value="2" class="editor-list-item">Đo sự thay đổi giữa hai thanh liên tiếp và chuẩn hóa bằng cách chia cho ATR.</li>
 <li value="3" class="editor-list-item">Chuyển tỷ lệ thu được thành độ thông qua arctangent, trả về giá trị xấp xỉ từ −90° đến +90°.</li>
 <li value="4" class="editor-list-item">Vẽ giá trị dưới dạng bộ dao động trong một bảng điều khiển riêng biệt và khi độ dốc vượt quá ngưỡng đã đặt, thêm nhãn trên biểu đồ giá được đặt phía trên đỉnh (xu hướng tăng) hoặc dưới đáy (xu hướng giảm).</li>
 </ul>
 Các tính năng chính
 <ul class="editor-list-ul">
 <li value="1" class="editor-list-item">Đo độ dốc độc lập với công cụ và khung thời gian nhờ chuẩn hóa theo ATR.</li>
 <li value="2" class="editor-list-item">Ngưỡng có thể cấu hình bằng độ để lọc các chuyển động quan trọng và loại bỏ nhiễu.</li>
 <li value="3" class="editor-list-item">Nhãn mã màu theo hướng (xanh lá cho tăng, đỏ cho giảm) với độ lệch theo chiều dọc dựa trên ATR để đặt vị trí gọn gàng so với nến.</li>
 <li value="4" class="editor-list-item">Xử lý đối tượng biểu đồ tối ưu: nhãn giới hạn ở các thanh gần nhất để giữ hiệu suất ngay cả trên các biểu đồ có lịch sử dài.</li>
 <li value="5" class="editor-list-item">Tham số hoàn toàn tùy chỉnh: khoảng thời gian SMA, khoảng thời gian ATR, ngưỡng độ dốc, hiển thị nhãn và số lượng nhãn tối đa.</li>
 </ul>
 Các trường hợp sử dụng
 <ul class="editor-list-ul">
 <li value="1" class="editor-list-item">Xác định các pha xu hướng mạnh so với các vùng đi ngang.</li>
 <li value="2" class="editor-list-item">Xác nhận hướng để hỗ trợ chiến lược vào và ra lệnh.</li>
 <li value="3" class="editor-list-item">So sánh sức mạnh xu hướng giữa nhiều công cụ sử dụng cùng một ngưỡng.</li>
 <li value="4" class="editor-list-item">Nền tảng để phát triển cBots sử dụng độ dốc đã chuẩn hóa làm tín hiệu giao dịch.</li>
 </ul>
 
 
 
 </body>
</html>

ATR-normalized MA slope in degrees, comparable across all instruments. Color-coded labels flag strong trend moves.

IM_AngleIndicator is a technical indicator that measures the slope angle of a simple moving average (SMA) normalized by the Average True Range (ATR). This normalization expresses the slope in degrees, making it comparable across different instruments and timeframes. The indicator calculates the SMA on closing prices, measures its change between bars, normalizes this change by the ATR, and converts the ratio into an angle between approximately −90° and +90°. It displays the angle as an oscillator in a dedicated panel and adds color-coded labels on the price chart to indicate strong bullish (green) or bearish (red) trends.

Key features include:
- ATR normalization for consistent slope measurement regardless of instrument or timeframe.
- Configurable angle thresholds to filter significant trend moves and reduce noise.
- Directional labels positioned relative to price bars for clear trend visualization.
- Customizable parameters such as SMA period, ATR period, slope threshold, label visibility, and maximum label count.
- Optimized label management for performance on long chart histories.

Use cases involve identifying strong trend phases, detecting potential reversals, confirming trade entries and exits, and comparing trend strength across multiple markets including Forex, commodities, and indices.

Forex

Signal

EURUSD

Commodities

XAUUSD

IM_AngleIndicator

Ivano Mangiarotti

IM AngleIndicator

Sync charts instantly: Zoom, Scroll, and change Timeframes on one chart while all others follow automatically.

Prop

BTCUSD

Crypto

GBPUSD

NZDUSD

USDJPY

Scalping

NexusChartSync_Pro_100_

Ten confluence layers scored on every closed bar, with an anti-chop gate, pivot levels and a live dashboard.

VWAP

Volume

Key Levels

Market Structure

FXB Confluence Engine

Kestutis Balciunas

cTrader confluence indicator: FXB Confluence Engine scores every bar out of 16; 7 rules to score better buy and sell signals.

FXB Confluence Engine is a cTrader indicator that scores every closed bar out of sixteen and prints a Buy or Sell only when enough of its checks agree. This guide shows seven rules to decide which signals to take and which to skip.
Get it on the cTrader Store:

Product page:
Seller profile:

What you will learn
- How to load it on any cTrader chart and read the dashboard block by block
- Every input group, explained on the chart as you watch
- Seven take-or-skip rules, each tested on real signals: the score, the anti-chop gate, moving-average alignment, the higher timeframes, stretched moves, the cooldown, and when a signal is invalidated
- Two quick tests and a final scorecard on four markets

What it draws
- A range filter line with a four-tier band, and the 60 and 200 moving averages
- Diamond Buy and Sell markers, printed on closed bars only
- Nine pivot levels from the previous day, with priced labels that change colour once price closes through them
- A dashboard with the signal quality score, the full score breakdown, every confirmation, the session, and the last signal

How it scores
- Up to 16 points: moving averages and momentum 4, higher timeframes 4, sensitivity ladder 3, 30-minute bias 1, volatility 2, RSI 1, volume 1
- An anti-chop penalty of 1 or 2 points when ADX or the Choppiness Index fails
- Bands: High from 80%, Medium from 57%, Low from 43%, Weak below that
- Minimum Signal Strength sets the floor a signal must clear, 8 out of 16 by default

Alerts
- Off by default; switch on the master and pick the events: signals, strong signals, trend change, chop gate, higher timeframe bias, RSI extremes, volume spikes, invalidated trade
- Each fires once when a bar closes, to the cTrader log with an optional sound

Free trial: runs on EURUSD with every input available. The full edition works on every symbol and timeframe in cTrader Desktop.

Chapters
0:00 FXB Confluence Engine for cTrader
1:07 What it draws
1:40 Load it on a chart
2:14 Reading the dashboard
2:43 Rule 1: read the score first
3:13 Rule 2: only when the chop gate is open
3:48 Rule 3: require the averages to agree
4:12 Quick test: take or skip?
4:28 Rule 4: check the higher timeframes
5:02 Rule 5: don't chase a stretched move
5:38 The score, line by line
6:12 Rule 6: wait out the cooldown
6:37 Rule 7: know when it is invalidated
7:18 Quick test: score it yourself
7:39 Make it yours
8:06 Never miss a signal
8:38 Putting the seven rules together
8:58 Three mistakes to avoid
9:19 The seven rules on four markets
9:54 Practise the rules on the free trial
10:13 Get FXB Confluence Engine

I am the developer of this indicator. It is an analysis tool and never places, modifies or closes orders.

Trading involves risk. Past performance does not guarantee future results.

#cTrader #ForexIndicator #TradingSignals

7 Rules to Score Better Buy and Sell Signals in cTrader

Eight-EMA ribbon with ATR trade zones, a nine-symbol screener and a five-timeframe trend dashboard.

Supply & Demand

Supply Demand Quadra Zones

cTrader buy sell indicator with risk and reward zones: Supply Demand Quadra Zones, and 7 steps to decide which crosses to trade.

Supply Demand Quadra Zones is a cTrader indicator that turns one moving-average cross into a drawn trade: an entry line, four targets, a stop at 2x ATR, and the two zones it is named for - a green one from the entry up to the last target and a red one down to the stop, both to scale. An eight-line EMA ribbon and a 200 EMA give the context, a six-row trend dashboard votes across timeframes, and a nine-symbol screener reads the rest of your watchlist. This guide shows the seven checks that decide which crosses are worth taking, then runs them across sixteen markets: forex, metals, crypto, indices and oil.

Get it on the cTrader Store:
Product page:
Seller profile:
Free indicators and tools:

What you will learn
- How to load it on any cTrader chart, and how to move both panels off the level lines
- Every setting that changes the picture, marked on the chart as it is changed
- Seven checks for a signal: the cross, the ribbon, the slow line, the dashboard, the screener, the zones and the closed bar
- Two quick tests, then sixteen markets read in a row

What it draws
- An eight-line EMA ribbon (5 to 34 bars) plus a 200 EMA
- BUY and SELL plates on the crossover bar
- An entry line, up to four targets and a stop, each tagged with its price
- A green zone from entry to the last target and a red zone from entry to the stop
- A six-row trend dashboard and a nine-symbol screener, each in any of four corners
- Alerts for BUY, SELL or both, with log, sound, e-mail and webhook channels

Good to know
- The cross is the entire entry rule: there is no score or filter behind it, which is why the seven checks are yours to make.
- Signals are decided on closed bars and never repaint; the two panels read the developing bar and can change until it closes.
- The stop is 2x ATR, so the red zone is as tall as the market's own volatility.
- Only one trade is drawn at a time: a new signal erases the previous one.
- The 4-hour option in the dashboard selectors does nothing by design; set Compatibility to Corrected to enable it.
- It never places, modifies or closes an order.

Free trial: runs on EURUSD, on every timeframe, with every feature present and no time limit.

Chapters
0:00 Supply Demand Quadra Zones for cTrader
1:16 What it draws
2:14 Load it on a chart
2:47 Reading the two panels
3:38 Check 1: the cross is the whole signal
4:20 Check 2: read the ribbon's shape
5:01 Check 3: which side of the slow line?
5:39 Quick test: take or skip?
6:05 Check 4: does the dashboard agree?
6:46 Check 5: what is the rest of the market doing?
7:15 Check 6: accept the zones, or pass
7:58 Check 7: what repaints and what does not
8:27 Quick test: read this one
8:52 Make it yours
9:25 Putting the seven checks together
9:43 Three mistakes to avoid
10:06 Sixteen markets, seven checks
12:47 Practise the checks on the free trial
13:08 Get Supply Demand Quadra Zones

I am the developer of this indicator.

Trading involves risk. Past performance does not guarantee future results.

#cTrader #ForexIndicator #TradingSignals

cTrader Supply Demand Quadra Zones: 7 Steps to Better Trades

Range-filter BUY/SELL signals scored by four confluence layers, with a stop, five targets and a trend panel

Support & Resistance

Wolf Blackout Trader

cTrader range filter indicator: Wolf Blackout Trader scores every signal by confluence; 7 checks for which ones to take.

Wolf Blackout Trader is a cTrader indicator built on a range filter: a line that holds still while price stays inside its range and only steps when price truly leaves it. When the filter turns, the turn is scored by four confluence layers (RSI, an EMA 144, the same EMA on a higher timeframe, and volume), and a turn with enough agreement prints a BUY or SELL plate with stars, an entry line, a stop and five targets, all tagged. Trend-coloured candles and a 21-row dashboard with a six-timeframe block give the context. This guide shows the seven checks that decide which flips are worth taking, then runs them across sixteen markets: forex, metals, crypto, indices and oil.

Get it on the cTrader Store:
Product page:
Seller profile:
Free indicators and tools:

What you will learn
- How to load it on any cTrader chart, and how to move the dashboard off the seven level lines
- Every setting that changes the picture, marked on the chart as it is changed
- Seven checks for a signal: the filter, the stars, the free points, the higher timeframe, volume, the percentage levels and the closed bar
- Two quick tests, then sixteen markets read in a row

What it draws
- One stepped range filter built from a fast (32) and a slow (89) smoothed range
- Trend-coloured candles, an EMA 144, and reversal markers at RSI extremes
- BUY and SELL plates with one to five confluence stars
- An entry, a 1 % stop and five targets at 0.5, 1, 1.5, 2.5 and 4 percent, each tagged
- A 21-row dashboard in any of six positions, with an MTF block from 5m to daily
- Alerts for both signals, both reversal markers, all five targets and the stop

Good to know
- The levels are percentages of the entry, not ATR multiples: set them to fit the market you are on.
- A confluence layer switched off still adds its point, so switching layers off raises scores and prints MORE signals.
- Signals are confirmed at the bar close; the minimum score ships at 2 out of 5, which is deliberately low.
- It needs a few hundred bars before both smoothed ranges exist, so give it a moment on a fresh chart.
- It never places, modifies or closes an order.

Free trial: runs on EURUSD, on every timeframe, with every feature present and no time limit.

Chapters
0:00 Wolf Blackout Trader for cTrader
1:12 What it draws
1:55 Load it on a chart
2:29 Reading the dashboard
3:14 Check 1: what the filter is doing
3:54 Check 2: count the stars
4:40 Check 3: know the free points
5:15 Quick test: take or skip?
5:44 Check 4: does the bigger picture agree?
6:16 Check 5: volume, and the reversal markers
6:53 Check 6: the levels are percentages
7:42 Check 7: closed bars, and not too often
8:12 Quick test: read this one
8:35 Make it yours
9:11 Putting the seven checks together
9:30 Three mistakes to avoid
9:52 Sixteen markets, seven checks
12:22 Practise the checks on the free trial
12:44 Get Wolf Blackout Trader

I am the developer of this indicator.

Trading involves risk. Past performance does not guarantee future results.

#cTrader #ForexIndicator #TradingSignals

IM AngleIndicator

Giới thiệu video này

Video khác

cTrader Supply Demand Quadra Zones: 7 Steps to Better Trades

7 Rules to Score Better Buy and Sell Signals in cTrader

The Power of Confluence: Using Wolf Blackout Trader for Trading

NexusChartSync_Pro_100_